.svg?alt=media&token=84a97302-0310-4dca-a48a-3d06bef38c5e)
Back to Products
CIBER
iNOVA 2000
Wheel mounted plants
Specifications
| Mixing performance | 100 to 200 t/h |
| Axles/tyres, 1st transport vehicle | 2/8 (+ 1 spare) |
| Axles/tyres, 2nd transport vehicle | 3/12 (+ 1 spare) |
| Transport vehicle | 2 |
| Size - transport vehicles 1 (L x W x H) | 13.9 x 3.2 x 4.3 m |
| Size - transport vehicles 2 (L x W x H) | 19 x 3.2 x 4.3 m |
| Suspension/brakes - transport vehicles 1 | Double Tandem/ABS |
| Suspension/brakes - transport vehicles 2 | Triple tandem/ABS |
| Mineral dosing | Separate weighing via belt conveyor scales |
| Hopper content | 10 m³ |
| Number of feed hoppers | 4 or 6 |
| Speed monitor | Inductive sensor for the speed (discharge conveyor) |
| Vibrator | 3 Vibrators in feed hopper 1 (standard); vibrators set in feed hopper 2 (option) |
| Burner | CIBER Total Air® |
| Dryer drum | Drying and heating of the mineral using the countercurrent flow principle |
| Number of filter cartridges | 176 |
| Filter efficiency | > 99.99% |
| Filter technology | Filter cartridges, Quick-change system with EasySpin tool |
| Filter surfaces | 1,091 m² |
| Maximum filter/production surface ratio | 5.5 m²/(t/h) |
| Bitumen Injection | Injection bar including nozzles |
| Cleaning | Cleaning flap on underside of mixer |
| Mixing zones | Dry mixing zone and wet mixing zone with bitumen |
| Mixing time | Configurable |
| Mixer | External twin-shaft pugmill |
| Wearing parts | Extremely wear-resistant material |
| Loading silo | 2 m³ |
| Mix transfer | Scraper chain conveyor |
| Type | Filling level sensor max., overload protection (flap), anti-segregation plate, inspection flap |
| Wearing parts | Extremely wear-resistant material |
| Climate control | Air conditioner |
| Control | Automatic or emergency mode (by operator + buttons for manual operation) |
| Control cab | Metal version with side door, includes control panel, control, buttons for actuators in manual and SPS mode |
| Filter | Emergency stop button |
| Control cab | Emergency stop button + internal acoustic alarm, Control voltage (24 V) |
| Dryer drum/burner | Emergency stop button |
| Feed unit | Fixed guard for moving parts, Emergency stop button, pull cord |
| Mixer | Emergency stop button |
| Electrical power supply | Main distribution with safety modules and motor trip-switch |
| Filter | Fresh air flap, Safety valve |
| Dryer drum | Countercurrent flow principle, drive with frequency converter (variable drum speeds) |
| Burner/dryer drum | Flame sensor - UV shutter check, Monitoring of drum outlet temperature |
| Additional vibrator | Set of three vibrators in feed hopper 2 |
| Bitumen flow meter | Closed system with Coriolis flow-through meter or volumetric flow-through meter |
| Compressor | Compressor position can be changed, if required |
| Fibre feed silo | Silo with 2 m³ |
| Added filler silo | Silo with 2 m³ |
| Own filler silo | Silo with 4 m³ |
| Fuel consumption | Fuel meter (e.g. oil meter) |
| Recycling | 25% recycling fed into the mixer or 40% recycling fed via dryer drum centre ring |
| Remote maintenance | Remote maintenance for service diagnostics and customer support |
| Four-fuel burner | Light oil, heavy oil, LPG and natural gas |
| Video camera | 4 Cameras |
+995 599 28 41 31